|
VTX ACCESSORIES

The V25 Angle Stop Mechanism (ASM) suspension system and dolly board accessories were initially designed as incremental improvements to the VERTEC suspension system to facilitate more rapid caterpillar-style suspension (with V25 enclosures transported face-down on dolley boards) for fixed angle tension mode.

Due to a high level of demand from the field for vertical transporter system conditioning and deployment, JBL Professional is pleased to introduce a new optional compression-style suspension kit and accessories for VTX V25.

By leveraging design features of the highly-effective VTX V20 ASM suspension system, comparable ease-of-use and deployment speed are now available for V25-CS-K equipped enclosures.

To retrofit enclosures, one VTX-V25-CS-K Compression Suspension Kit is required per VTX V25 enclosure. At least one VTX-V25-CS-K-LJ label jig installation fixture should be ordered with each VTX-V25-CS-K order. Detailed label application instructions are included with the label jig. The entire process to install VTX-V25-CS-K and convert one V25 cabinet to compression suspension can be completed in approximately 10 minutes.

  • Ideal for vertical transporter use
  • Rapid, secure, precise installation
  • Improved long throw resolution
  • Optimum truck pack dimensions
  • Convenient retrofit for existing V25 enclosures from fixed angle tension to compression mode

VTX-V20-DF DOWNFILL ADPATER

Designed to facilitate fast attachment and precise alignment of VTX V20 and V25-II / V25-II-CS systems, the VTX V20-DF is a lightweight solution for providing wider coverage at the bottom of VTX V25-II / V25-II-CS arrays.

Features
  • Lightweight design with multiple options for angle between V25-II / V25-II-CS and V20. (3.5deg, 7.5deg, 11deg)
  • Able to be used as a downfill adapter frame for V25-II arrays, or as a downfill adapter frame + pullback frame for compression of VTX V25-II-CS arrays with V20 downfill
  • Supports up to 6x VTX V20 cabinets suspended underneath VTX V25-II / V25-II-CS

IMAGES
DOCUMENTATION
VTX-V25-WG-UK WAVEGUIDE UPGRADE KIT  

Leveraging the highly effective design attributes of the VTX V20 waveguide, V25-II features enhanced acoustic loading for the D2 Dual Diaphragm Dual Voice Coil compression driver with significantly refined wavefront control. The resulting increased sensitivity and amplifier headroom yields higher maximum SPL output and improved long throw performance, plus optimum system packaging when driven by Crown Audio VRack IT4x3500HD.

Features
  • Easy to retrofit original V25 enclosures and convert to V25-II
  • New V25-II waveguide has the same external dimensions and mount points
  • Existing V25 enclosures can be retrofitted in approx 10 minutes
  • V25-II waveguide maintains the same outstanding horizontal coverage performance of the original V25 waveguide
  • Includes: waveguide, gaskets, detailed instructions.

IMAGES
DOCUMENTATION
VTX-V25-CS-K COMPRESSION SUSPENSION KIT

Compression suspension can be implemented on existing VTX V25 cabinets equipped with the new VTX-V25-CS-K compression suspension kit using VTX-V25-PB Pull Back, VTX-V25-LH Lever Hoist accessories.

The kit includes: 
  • 2x Suspension frame labels
  • 2x Slot hinge bars
  • 2x ASM bars
  • 2x Quick Release Pin (QRP) / lanyard assemblies and all required mount hardware

IMAGES
DOCUMENTATION
VTX-V25-CS-K-LJ LABEL KIT

Compression Suspension Kit Label Jig to ensure proper placement, alignment and adhesion when installing labels.

The kit includes: 
  • 2 spare labels
  • Label jig installation fixture
  • Detailed instructions (see documentation download)
    NOTE: At least one label jig installation fixture should be ordered
    per VTX-V25-CS-K order

IMAGES
DOCUMENTATION
VTX-V25-PB PULL BACK ACCESSORY

Pull Back accessory for attachment to bottom V25 enclosure to facilitate compression suspension of VTX-V25-CS-K equipped arrays. Includes all parts needed to properly compress a VTX V25 array equipped with the VTX-V25-CS-K compression suspension kit.
  • Spreader bar with integrated attachment brackets
  • Master link
  • Shackles and dual leg chain bridle with locking safety hooks
  • The only factory-approved device for compression of VTX V25 arrays

IMAGES
DOCUMENTATION
VTX-V25-LH LEVER HOIST

Factory-approved manual lever hoist for compression of VTX-V25-CS-K equipped systems. The CM Series 653 for use with VTX V25 is a 1 ½ ton model with 20’ of chain length for compressing arrays of up to 18 cabinets with no additional extension hardware needed.
  • Lever Hoist (1 ½ ton rating) for use with VTX-V25-PB
  • For compression of VTX-V25-CS-K equipped arrays

IMAGES
DOCUMENTATION
VTX-V25-VTC VERTICAL TRANSPORTER

With design features similar to VTX-V20-VT, the VTX-V25-VTC is a simple and cost-effective solution for vertically transporting VTX V25-CS enclosures in blocks of 3 or 4 cabinets high. Measuring 48” wide by 25” deep, the VTX-V25-VTC will travel 4 across (length-wise) in standard 100” trailers, and 2 across (width-wise) in standard 96” trucks.
  • Can transport 3x or 4x V25 enclosures high
  • Heavy duty locking casters
  • Stackable
  • Fully compatible with existing VTX-V25-VT-CVR protective covers

IMAGES
DOCUMENTATION
VTX-S28-VTC VERTICAL TRANSPORTER

The VTX-S28-VTC vertical transporter can accommodate 3x S28 enclosures high in either front-firing or cardioid mode and transporters are dimensioned to fit 2 across (width-wise) in standard 96” trucks. The VTX-S28-VTC transporter features heavy duty locking casters and is stackable plus fully compatible with existing VTX-S28-CVR protective covers.
  • Can transport 3x S28 enclosures high in either front-firing or cardioid mode
  • Heavy duty locking casters
  • Stackable
  • Fully compatible with existing VTX-S28-CVR protective covers
  • Optimally-dimensioned to fit in 100” (2.55 m) or 96” (2.44 m) trucks

IMAGES
DOCUMENTATION
VTX-V25-VT-CVR PADDED COVER

Reinforced, padded protective cover for 3x or 4x VTX-V25 enclosures when transported vertically.
  • Handle cutouts
  • Rear panel access flap

IMAGES
DOCUMENTATION
VTX-S28-VT-CVR PADDED COVER

Reinforced, padded protective cover for 3 VTX-S28 enclosures when transported vertically in either front-firing or cardioid mode.
  • Handle cutouts
  • Rear panel access flap

IMAGES
DOCUMENTATION